Solid State Logic Soundscape Mixer Manual de usuario descargar pdf (Pagina 24)

Soundscape Mixpander

Page 24 of 109

Fixed inputs and outputs always connect to an output or input with a matching number. For

instance, an element with a single mono output, (output 1), will always connect to the left side

input, (input 1), of a stereo element, as shown below. This type of configuration should be avoided,

because the presence of an unconnected input can create problems:

...instead, a mixer element with a single output should be connected to a mixer element with a

single input:

1 2

Incorrect configuration:

A mono mixer element (Drawmer SDX100

compressor/expander, is connected to a

stereo mixer element (Wave Mechanics

Reverb). Input 2 of the stereo reverb is

unconnected. This could create audible

problems.

1 2

Correct configuration:

A mono mixer element (Drawmer SDX100

compressor/expander) is connected to a

mono to stereo mixer element (Wave

Mechanics Reverb).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 108 109

Sin comentarios

Solid State Logic Soundscape Mixer Manual de usuario Pagina 24