Solid-state-logic X-Logic Series Manual de usuario descargar pdf (Pagina 28)

Page A-4

X-Rack Owner’s Manual

A.3.4 Instrument Input Performance

Un-balanced signal applied to Instrument Input and measured at Output. Pad switched out and Input

Gain control set to +12dB (minimum).

Gain Continously variable from +12dB to +75dB

Independently switchable 18dB Pad available

Input Impedance 1MΩ

Output Headroom > +26dBu at onset of clipping

THD + Noise < 0.03% at 1kHz

(-18dBu applied, +28dB gain) < 0.05% at 10kHz

Frequency Response +0.05dB/-0.1dB from 20Hz to 20kHz

–3dB at 150kHz

Equivalent Input Noise < –82dB at +12dB (minimum) gain

(Input terminated with 150Ω) < –88dB at +28dB gain (mid’ position)

A.3.5 Line Input Performance

Signal applied to Line Input and measured at Output. Input Gain control set to 0dB (indent).

Gain Continuously variable from –20dB to +20dB

Input Impedance > 10kΩ

THD + Noise < 0.005% from 20Hz to 20kHz

(+24dBu applied, 0dB gain)

Frequency Response ±0.1dB from 20Hz to 20kHz

–3dB at 150kHz

Equivalent Input Noise < –90dB

(Input terminated with 150Ω)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

Sin comentarios

Solid-state-logic X-Logic Series Manual de usuario Pagina 28