Solid-state-logic 82S6XR0A0B Manual de usuario descargar pdf

Super-Analogue™ Outboard

X-Rack Mic Amp User’s Guide

This documentation package contains the User’s Guide for your new X-Rack Mic Amp

module. Depending on the age of your X-Rack, these pages may already be present in

your X-Rack Owner’s Manual – please check to see if these pages match your Manual.

If they do not, these pages should be filed alongside it.

Please Note. X-Rack units prior to serial number XRK0110 are not 100% compatible with the X-Rack Mic

Amp as these units can not provide +48V phantom power unless field retrofit kit 629620XR

has been fitted. This kit is available free-of-charge from your local distributor, if the X-Rack unit

concerned is in warranty. For units that are out of warranty a small charge will be made. The

absence of this kit is indicated by the buscard in the X-Rack being a ‘629620X1 RE 1’ (rev 1),

with a number of components (ie. ‘IC2’, ‘C4’, ‘L4’) missing.

For correct operation of Total Recall™, your X-Rack unit must be running V1.1/0 or later

software. Please refer to your X-Rack Owners Manual for instructions on how to check the

current software version and how to obtain and install a newer version if required.

There may be a newer version of the X-Rack Owner’s Manual available for download from our

website ( http://www.solid-state-logic.com )

82S6XR0A0B

Solid State Logic

S O U N D

V I S I O N

SUPERANALOGUE

X-RACK

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Solid State Logic

Super-Analogue™ OutboardX-Rack Mic Amp User’s GuideThis documentation package contains the User’s Guide for your new X-Rack Mic Ampmodule. Depending o

Pagina 2

Pagina 3 - A. The Mic Amp Module

Page A-1X-Rack Mic Amp ModuleA. The Mic Amp ModuleA.1 ConnectionThe rear panel of the module carries the Mic (‘IN’) and Line input (‘LINE’) XLRs along

Pagina 4 - X-Rack Owner’s Manual

Page A-2X-Rack Owner’s ManualA.2.3 HF/LF SectionThis section contains simple high and low pass filters as follows:HF (Low Pass): Frequency range 50kHz

Pagina 5 - A.3 Performance Specification

Page A-3X-Rack Mic Amp ModuleA.3 Performance SpecificationThe following pages contain audio performance specification figures for the X-Rack Mic Amp m

Pagina 6 - Page A-4

Page A-4X-Rack Owner’s ManualA.2.4 Instrument Input PerformanceUn-balanced signal applied to Instrument Input and measured at Output. Pad switched out

Pagina 7 - A.4 Calibration Information

Page A-5X-Rack Mic Amp ModuleA.4 Calibration InformationThe X-Rack Mic Amp module is factory calibrated and should only need calibration if a potentio

Pagina 8 - A.6 Physical Specification *

Page A-6X-Rack Owner’s ManualA.5 Connector DetailsA.6 Physical Specification *Depth: 200mm / 7.9 inches including front panel knobs, excluding connect

Comentarios a estos manuales

Sin comentarios

Solid-state-logic 82S6XR0A0B Manual de usuario

Busca en linea o descarga Manual de usuario para Receptores y amplificadores Solid-state-logic 82S6XR0A0B. Solid State Logic 82S6XR0A0B User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Receptores y amplificadores Solid-state-logic 82S6XR0A0B